View cart “GS-5220-24PL4X – 24-Port 30W PoE Managed Switch with 4-Port Shared SFP + 4-Port 10G SFP+ (600W)” has been added to your cart.

POE-E304 – 4 Port 30W PoE Extender Splitter / 1-Port 60W PoE

Out of stock

Physical Port

  • 5-port 10/100/1000BASE-T Gigabit RJ45 interface

- 1-port data+power input - 4-port data+power output Power over Ethernet

  • 1-port data + power input

- Complies with ultra Power over Ethernet end-span and mid-span PD- Complies with IEEE 802.3at Power over Ethernet Plus end-span / mid-span PD- Supports PoE input power up to 60 watts

  • 4-port data + power output

- Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE- Up to 4 IEEE 802.3af/802.3at devices powered- Supports PoE power up to 30.8 watts for each PoE port- Auto detects powered device (PD)

  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 9K Jumbo packet support
  • IEEE 802.1Q VLAN transparency
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
  • Automatic address learning and address aging

Case and Installation

  • No external power cable installation required
  • Made of metal, desktop size design
  • Wall-mountable, Plug-and-Play installation
  • 0 ~ 50 degrees C operating temperature
POE-E304 - 4 Port 30W PoE Extender Splitter / 1-Port 60W PoE
Hardware Specifications
Network Connector PoE In Port 1 x 10/100/1000BASE-T Ethernet with Ultra PoE “Data + DC” in, auto MDI/MDI-X, auto-negotiation RJ45 connectorPoE Out Port 4 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC” out, auto MDI/MDI-X, auto-negotiation RJ45 connector
Data Rate 10/100/1000Mbps
Switch Architecture Store-and-Forward
MAC Address Table 2K
Data Buffer 2Mbits
Switch Fabric 10Gbps
Switch Throughput 7.44Mpps @ 64 bytes
Jumbo Frame 9K
Flow Control IEEE 802.3x pause frame for full duplex Back pressure for half duplex
LED Indicators PoE In Port 10/100 LNK/ACT (Orange), 1000 LNK/ACT (Green) PoE Out Port 1 to Port 4 10/100 LNK/ACT (Orange), 1000 LNK/ACT (Green) PoE-in-Use (Orange) PoE Max. (Orange)
Protection ESD (Ethernet): 6KV Surge (EFT for power): 2KV
Enclosure Metal
Installation Desktop/Wall mountable
Dimensions (W x D x H) 160 x 92.5 x 28 mm
Weight 370g
Power Requirements PoE In: IEEE 802.3bt or 4-pair 802.3at PoE+ compliant with voltage within 50V-56V DC External DC: 50~56V DC
Power Consumption 4 watts/13.7BTU (System on with PoE input) 6 watts/20.6BTU (Ethernet full loading without PoE function) 60 watts/205.9BTU (Full loading with PoE function)
Network Cable 10BASE-T: 4-pair UTP Cat5 up to 100m (328ft) 100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft) 1000BASE-T: 4-pair UTP Cat5e, 6, up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m, 328ft)
Power over Ethernet
PoE Standard PoE In Port Ultra Power over Ethernet end-span/mid-span PD class 4 PD Per PoE Out Port IEEE 802.3at Power over Ethernet Plus end-span PSE IEEE 802.3af Power over Ethernet end-span PSE
PoE Power PoE In Port 50~56V DC, max. 60 watts Per PoE Out Port 44~55V DC, max. 30.8 watts
Power Pin Assignment PoE In Port 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) or 1/2(-), 3/6(+); 4/5(+), 7/8(-) Per PoE Out Port 1/2 (+), 3/6 (-), end-span (Type A)
PoE Power Budget 50 watts (max.) @ Ultra PoE input 20 watts (max.) @ IEEE 802.3at PoE+ input
Standard Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standard Compliance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3x Flow Control
Operating Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Click here to open the datasheets