Back

POE-E202 – 2 Port PoE Extender Splitter

Part Number:POE-E202

IN STOCK. Same day shipping available.

1-Port 802.3at PoE+ to 2-Port 802.3af/at Gigabit PoE Extender

Physical Port

  • 3-port 10/100/1000BASE-T Gigabit RJ45 interface

- 1-port data+power input - 2-port data+power output Power over Ethernet

  • 1-port data + power input

- Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD- Supports PoE input power up to 30.8 watts

  • 2-port data + power output

- Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE- Up to 2 IEEE 802.3af/802.3at devices powered- Supports PoE power up to 25 watts for each PoE port- Auto detects powered device (PD)

  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 10K iumbo packet support
  • IEEE 802.1Q VLAN transparency
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

Case and Installation

  • No external power cable installation required
  • Made of metal, desktop size design
  • Wall-mountable, Plug-and-Play installation
  • 0 ~ 50 degrees C operating temperature
POE-E202 - 2 Port PoE Extender Splitter
Interfaces
PoE IN 1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE “Data + DC power” in auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE OUT 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC power” out auto MDI/MDI-X, auto-negotiation RJ45 connector
Power over Ethernet
PoE Standard “PoE In” Port IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD Per “PoE Out” Port IEEE 802.3at Power over Ethernet Plus end-span PSE IEEE 802.3af Power over Ethernet end-span PSE
PoE Power Supply Type End-span (Type A)
PoE Power “PoE In” Port 52~56V DC, max. 30.8 watts Per “PoE Out” Port 44~55V DC, max. 25 watts
Power Pin Assignment “PoE In” Port 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) Per “PoE Out” Port 1/2 (+), 3/6 (-)
Hardware Specifications
Data Rate 10/100/1000Mbps
MAC Address Table 2K
Data Buffer 2Mbits
Switch Architecture Store-and-Forward
Switch Fabric 6Gbps
Switch Throughput 4.46Mpps @ 64 bytes
Jumbo Frame 10KB
Flow Control IEEE 802.3x pause frame for full duplex Back pressure for half duplex
LED Indicators “PoE In” Port: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) “PoE Out” Port 1: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) “PoE Out” Port 2: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green)
Protection ESD (Ethernet): 2KV (TBD) Surge (EFT for power) : 2KV (TBD)
Enclosure Metal
Installation Wall mountable
Dimensions (W x D x H) 140 x 77 x 28 mm
Weight 234g
Power Requirements IEEE 802.3at compliant with voltage within 52V-56V DC
Power Consumption 1.6 watts/5.5BTU (System on with PoE input) 2.2 watts/7.5BTU (Ethernet full loading without PoE function) 36 watts/122.8BTU (Full loading with PoE function)
Network Cable 10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft) 100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft) 1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m, 328ft)
Standard Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standard Compliance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3x Flow Control
Environment
Operating Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Click here to open the datasheets