All Product Enquiries to:

EQL Networks & Security
PO Box 351
Minto NSW 2566
Australia

Tel: + 61 2 9824 5680
Fax: + 61 2 9824 5685

* EQL Networks & Security
 is 100% owned by
 EQL International Marketing Pty Ltd

• High Reliability and Durability Coax to Cat 5 Converter
• Bi-directional signal conversion 
• Compact enclosure 
• Standard configuration or customised to your requirements
• High quality and performance  
• Passive Device (No power supply required)
• Quick Connect IDC Termination - No Impact Tool Required

Specifications for Quick Connect IDC CCTV Video Baluns: 

• Bandwidth DC to 8 Mhz
• 75 Ohm BNC to 100 Ohm Cat 5 interface
• Maximum input: 1.1 Vp-p
• Insertion Loss <2 dB to 8 MHz 
• Return Loss >12 dB to 8 MHz
• Common Mode Rejection >40 dB @ 8Mhz
• Maximum distance color: To 350m (1100 ft) Cat 3 or 400m (1300 ft) Cat 5e
• Maximum distance black & white: To 400m (1300 ft) Cat 3 or 700m (2200 ft) Cat 5e
• Cat 5 termination A (+) and B (-)
• Operating Temperature: 0 to 55 ^oC Storage: -22 to 80 ^oC Humidity: 95%

• Casing: Fire retardant plastic, ABS UL 94V-0

	Step 1 Strip Jacket of Cat 5 Cable approximately 15 mm from end to be terminated. Step 2 Fan out twisted cable pairs and select pair of Cat 5 Cable to be terminated onto the Insulation Displacement Contact (IDC) and select pair to be used. Step 3 Open cover of Quick Connect Video Balun
	Step 4 Open IDC Cover which also doubles as a cable insertion tool for the cable to the IDC. Step 5 Fully insert solid colour wire eg Orange into wire slot marked "Tip" see Figure 1 Step 6 Fully insert striped coloured wire eg Orange/White into wire slot marked "RIng" - see Figure 1
	Step 7 Bend and lay each wire into their corresponding IDC terminal - see Figure 2 Step 8 Close IDC Cover until there is a "Click" sound to ensure the wires are properly inserted into the IDC. - see Figure 3.
	Step 9 Close Balun Cover to complete termination. Step 10 Connect Balun to equipment Note: The G terminal is not connected.
Other Related CCTV Products
	Ground Loop Isolator Eliminate Hum Bars and interference due to grounding problems. P/N: E10500 More information		Quad Balun Connect 4 cameras using 1 Cat 5 backbone cable to DVR P/N: E10172 More information
	Quad Balun Bulkhead Connect 4 cameras Panel Mount  P/N: E10172B More information		Quad Power Through Balun Bulkhead Panel Mount  P/N: E10174 More information
	VGA Balun Connect a remote VGA Monitor to PC via shielded Cat 5 cable. P/N: E10680C/M More information		Versatile Balun Hub Caters for Video only Video + Power and Video + Power + PTZ  P/N: E10700A More information
	Active Transceiver (Video) (Transmitter and Receiver) with range to 1500 metres P/N: E10600T/R More information		Active Transceiver (Video Transmitter and Receiver) with range to 1800 metres High Interference Immunity P/N: E10610T/R More information
	Active Transceiver (Video and Audio Transmitter and Receiver) with range to 1500 metres P/N: E10630T/R More information		Quad Adapter Allows 1 Cat 5 4 pair input to be split to 4 single pair RJ45 Jack. P/N: E10170 More information