All Product Enquiries to:

EQL Networks & Security
PO Box 351
Minto NSW 2566
Australia

Tel: + 61 2 9824 5680
Fax: + 61 2 9824 5685

* EQL Networks & Security
 is 100% owned by
 EQL International Marketing Pty Ltd

PoE

 • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
 • Up to 4 IEEE 802.3af devices powered
 • Support PoE Power up to 15.4 watts for each PoE ports
 • Auto detect powered device (PD)
 • Circuit protection prevent power interference between ports
 • Remote power feeding up to 100m

PoE Management

 • Total PoE power budget control
 • Pert port PoE function enable / disable
 • PoE Port Power feeding priority
 • Per PoE port power limit
 • PD classification detection

Management

 • Web interface for remote management
 • Firmware upgrade through Web interface
 • PLANET Smart Discovery utility automatically finds PLANET devices on the network
 • SNMP Trap for alarm notification of events

Switching

 • Hardware based 10/100Mbps Auto-negotiation and Auto MDI / MDI-X function
 • Flow control for full duplex operation and back pressure for half duplex operation 
 • Integrates address look-up engine, support 1K absolute MAC addresses 
 • Automatic address learning and address aging 
 • IEEE 802.1Q Tag based VLAN and Port-Based VLAN
 • 2 priority queues on all switch ports
 • Port Based, IP DSCP and 802,1p tag priority QoS
 • Ingress / Egress Bandwidth Control
 • Port Security 

Hardware

 • 10-inch desktop size, rack mountable; 1U height
 • Reset button for reset to default setting and system reboot
 • LED indicators for POE ready and POE activity
 • Optional Rack Ear Accessories Kit for 10-inch cabinet (RKE-10A) and 19-inch cabinet (RKE-10B)
 • 1silent FAN to provide stable and efficient power performance
 

Specifications:

Model	FSD-804PS
Hardware Specification
Network Connector	8-Port RJ45 for 10/100Base-TX
PoE Inject Port	4-Port with PoE injector function, Port-1 to Port-4
LED Display	One power 1-4 port PoE in-use, LNK / ACT 1-8 port LNK / ACT
Switch Architecture	Store and Forward switch architecture
Switch Fabric	1.6Gbps
MAC Address	1K MAC address table with Auto learning function
Throughput	1.19Mbps
Power	AC 100~240V, 50/60Hz,
Power Consumption	Max. 65 watts / 221 BTU
Dimension (W x D x H)	217 x 135 x 43 mm
Weight	1.0 kg
Power over Ethernet
PoE Standard	IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type	End-Span
PoE Power Output	Per Port 48V DC, 350mA . Max. 15.4 watts
Power Pin Assignment	1/2(+), 3/6(-)
PoE Power Budget	60 watts
Layer 2 Function
Management	Web management, SNMP Trap
VLAN	Port-Based VLAN and IEEE 802.1Q Tag-Based VLAN, up to 16 VLAN groups
QoS	2 priority queues for three type of Class of Service 　• Port-Based 　• IEEE 802.1p priority tag 　• TCP / IP header's DSCP classifier Weighted Round Robin queue scheduling
Bandwidth Control	Inbound Rate Limit and Outbound Traffic shaping
Storm Control	Disable, 12.5%, 25%, 50%, 62.5% 4 levels
Standard Conformance
EMI Safety	FCC Class A, CE
Operating environment	0~40 degree C, 10%~95%RH
Storage environment	-40 ~70 degree C, 95% RH
Operating Humidity	5% to 90% , relative humidity, non-condensing
Storage Humidity	5% to 90% , relative humidity, non-condensing
Standard Compliance	IEEE 802.3　　　　Ethernet IEEE 802.3u　　　 Fast Ethernet　 IEEE 802.3x　　　 Flow Control　 IEEE 802.3af　　　Power over Ethernet　 IEEE 802.1p　　　 Class of Service　 IEEE 802.1Q　　　 VLAN Tagging
* The specification is for FSD-804PS hardware version 3 only.

Typical Applications

Department / Workgroup PoE Switch

Providing up to 4 PoE, in-line power interface, the switch can easily build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 4 camera / AP can be easily installed around the corner in the company for surveillance demands or build a wireless roaming environment in the office. Without power-socket limitation, the switch makes the installation of cameras or WLAN AP more easily and efficiently.